Browse all practice questions for the CMFD Engineer Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

CMFD Engineer Practice Exam course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Which color on the glad-hand indicates emergency?
  • How much spare foam do we carry on the Engines?
  • What is the total duration of one complete EPU cycle (2 minutes on, 1 minute off)?
  • What is the role of a boundary condition at an outlet when backflows may occur?
  • What is the role of a preconditioner in iterative linear solvers?
  • Which of the following is an example of a source term in the CFD governing equations?
  • What is a typical criterion to choose a turbulence model in a given flow?
  • Which pumping configuration involves one pumper discharging to the intake of another to create high pressure?
  • In the friction loss formula FL = C Q^2 L, what does C stand for?
  • How does SIMPLEC differ from SIMPLE in CFL-P coupling?
  • Which methods can power the compressor on the USAR?
  • Where is the generator overload reset button located?
  • What is the function of the secondary black brake knob located on the dash on the ALF Quint?
  • Which statement about steady CFD simulations is true?
  • Which statement about the USAR ladder compliment is true?
  • What is the primary role of the heat transfer coefficient h in convection problems?
  • Which of the following indicates a failing alternator?
  • How many gallons are in 50 feet of 3/4 inch hose?
  • What is the maximum RPM for the generator on the ALF Quint?
  • What is a stagnation point and how does it relate to pressure distribution around a body in a flow?
  • What is the function of the clam shell on the BK radios?
  • In the definition Nu = hL/k, what does L represent?
  • What is the pre-set nozzle GPM setting for 1 3/4 inch handline?
  • Which of the following statements about gas monitoring is true?
  • What is the generator rating (watts) on the ALF Quint?
  • What is the MDC sign on password?
  • What causes non-orthogonality effects in CFD discretization and how can they be mitigated?
  • Which option is NOT a valid action when signing out?
  • What is the ladder compliment on the USAR?
  • When signing off an apparatus, what is the initial required action?
  • What is the wattage of the tripod lights attached to the USAR?
  • In the Finite Element method, what is the role of shape functions?
  • In a two-dimensional lid-driven cavity problem, which configuration yields typical primary and secondary vortices and shows grid refinement improving accuracy?
  • What is a sign of overheating in a pump system?
  • Which scenario would typically require an unsteady CFD simulation?
  • In the friction loss formula FL = C Q^2 L, what does Q represent?
  • Using a water weight of 8 lb/gal, what is the pounds-per-minute for a 250 GPM nozzle?
  • How do verification and validation differ in CFD model assessment?
  • What is the purpose of the residual monitor in a CFD simulation?
  • Which statement best describes the Roe solver in CFD applications?
  • Describe a conjugate heat transfer problem in CFD.
  • Blue on the glad-hand indicates which function?
  • For which case is boundary-layer mesh most appropriate?
  • Which statement best describes the cause of flow separation?
  • Which expression correctly defines the drag coefficient in CFD?
  • On which day of the week are weekly checks performed on the station generators?
  • How do Newtonian and non-Newtonian fluids differ in their constitutive relations for shear stress?
  • What gases does the gas monitor detect?
  • Under which condition should the chain be replaced on the chain saw?
  • Dual Pumping configuration involves which arrangement?
  • Which apparatuses have the tilt cab mechanism to get to the engine compartment?
  • How does the Telma Retarder braking system operate?
  • Which mode is the waterway stored in on the ALF Quint?
  • What boundary condition is effectively enforced inside the obstacle when using a drag penalty method?
  • Which statement describes the Boussinesq approximation?
  • Explain the difference between species diffusion and turbulent diffusion.
  • Name three common turbulence models and a key characteristic of each.
  • Using wall functions in the k-ε model primarily allows wall treatment at higher y+ values.
  • In the GPM formula, what does D stand for?
  • Who must sign the fuel reports?
  • The foam system on the Engines has a main foam tank capacity of how many gallons?
  • How is isothermal flow defined and implemented in CFD?
  • Calibration of the gas monitor is performed when which condition is met?
  • The Plasma Cutter draws 12,000 watts. Which option correctly reflects this power draw?
  • Which Engines have hard lines?
  • What does C-O-L-A stand for in the DMV Air Brake check?
  • What are the maximum amps you can use at the aerial tip on the ALF Quint?
  • When would you use a porous media flow model and what equation governs it?
  • In the GPM formula GPM = 29.7 x D^2 x NP, what does NP stand for?
  • Grid stretching near walls can affect near-wall resolution and overall stability. What is a common trade-off of using dense near-wall grids?
  • In the DMV Air Brake check, which combination is correct for COLA?
  • Relay Pumping is described as?
  • What is the Pump Discharge Pressure (PDP) formula?
  • Cavitation warning signs include which of the following?
  • Which statement accurately describes how to sign on?
  • In a diesel engine, how many spark plugs are used in the described setup?
  • When do you need to replace the chain on the chain saw?
  • What does the acronym EPU stand for on the ALF Quint?
  • Oxygen bottles will be filled when the psi drops below...
  • Which statement best describes the effect of discretization schemes on energy conservation in thermal CFD?
  • What is a Manufactured Solution in code verification?
  • Where should the completed fuel report be sent?
  • Using the rule that a psi drop of 8 psi is produced by the difference between 60 and 52, what percent drop does 8 psi represent relative to 60 PSI?
  • Which statement describes a segregated solver approach?
  • Head pressure equals how many psi per foot?
  • How is turbulent diffusion commonly represented in turbulence modeling?
  • Which apparatus carry chain saw?
  • In the drag coefficient formula, what does Fd represent?
  • If the static pressure drop is between 1% and 10%, how many additional lines can be added?
  • Which statement about the rear discharge operation on the ALF Quint is true?
  • With a 1 3/4 inch handline flowing 125 GPM, static pressure 60 PSI, and residual pressure 52 PSI, how many more like lines flowing 125 GPM can be added?
  • When are the fuel reports due, and what must accompany the completed report before sending to the Corp yard?
  • What does a mesh skewness metric primarily measure in a CFD mesh?
  • Which boundary condition allows flow to exit a domain with minimal reflection?
  • What is the angle of departure?
  • The transmission should be placed in what mode before activating the PTO on the USAR?
  • In a 2:1 run-to-rest ratio, what fraction of time is spent resting?
  • What do compound gauges measure on fire pumps and why are they used?
  • What indicates which discharge should be used to flow foam?
  • According to our SOP, what is the maximum amount of foam that you should flow at any given time?
  • Tandem Pumping is described as?
  • What does the mass-fraction (species transport) equation represent in multi-species CFD?
  • In the friction loss formula, which variable controls friction loss when hose length changes?
  • What causes cross-stream secondary flows and vortices in curved ducts?
  • What characterizes the Reynolds Stress Model (RSM) turbulence model?
  • Which expression defines Reynolds number and what does it signify in CFD modeling?
  • Which option describes signing on?
  • Which fluids can be checked without tilting the cab on the Engines?
  • How often is the SCOTT SCBA filling station serviced?
  • How can you interpret a plateau in residuals during a CFD run?
  • What boundary condition enforces zero velocity relative to a solid boundary (no slip)?
  • In the friction loss formula FL = C Q^2 L, what does L represent?
  • What size (watts) is the built-in generator on the USAR?
  • What is the difference between explicit and implicit time integration, with respect to stability and stiffness?
  • The inverter rating on the Engines is approximately how many watts?
  • What is the pressure regulator for the Maxi Force Air Bags set at?
  • Which steps are required to sign off an apparatus?
  • During sign-off, after notifying dispatch and clicking sign out, what is the next step?
  • Which boundary condition would you use to specify a fixed velocity profile at an inlet?
  • How large are the foam tanks on the Engines?
  • According to SOP, what is the maximum percentage of foam to flow at any given time?
  • Which statement best differentiates diffusion-dominated and advection-dominated transport and informs the choice of numerical scheme?
  • Which step is necessary to sign on after signing off?
  • What is the run to rest ratio of the EPU on the ALF Quint?
  • What is y+ and why does it matter for wall-resolved turbulence modeling?
  • What boundary conditions are typical for isothermal flow regarding temperature?
  • What is the purpose of wall functions in the k-ε turbulence model?
  • In an eight-cylinder Detroit diesel four-stroke engine, how many spark plugs are used?
  • What indicates convergence in a mesh independence (grid convergence) study?
  • What color do heat sensor stickers turn when they reach the critical temperature?
  • What is the estimated head pressure from the 19th floor of Center Tower building?
  • To sign on after signing off, which action is required?
  • What best describes a boundary-layer mesh?
  • What is the function of the Total Pressure Master (TPM) relief valve system on our Engines?
  • In a typical 2D lid-driven cavity flow, where are the secondary vortices located?
  • Which list represents the complete COLA elements?
  • When using the rear 4" discharge/intake as a rear discharge on the ALF Quint, what must you do first?
  • What is the horizontal reach of the aerial ladder on the ALF Quint?
  • What is the CFL condition for an explicit time marching scheme and why is it important?
  • Identify the engine models that include chain saws.
  • What are common boundary condition types for velocity and pressure in fluid flow simulations?
  • Which sequence correctly describes signing off an apparatus?
  • What will happen if you exceed the maximum amps at the aerial tip on the ALF Quint?
  • What is the main difference between finite volume and finite element discretization in CFD?
  • How many watts does the Plasma Cutter draw?
  • How would you model a compressible flow at Prandtl number near unity?
  • Which Engines have rotary saws?
  • How is the Nusselt number computed from CFD results for a heated surface?
  • How many gallons of foam are in the ALF Quint's foam tank?
  • What is a drag penalty method and when is it used?
  • Which statement best describes grid stretching in computational fluid dynamics and its impact on near-wall resolution?
  • What identifies the MDC password on equipment?
  • In the GPM formula GPM = 29.7 x D^2 x NP, what is NP?
  • Which statement best describes the Telma Retarder braking system?
  • What is the purpose of a turbulence model wall function in near-wall modeling?
  • Why is near-wall resolution important in turbulence modeling?
  • Which statement is true about glad-hand color coding?
  • How many gallons of water are in the ALF Quint's water tank?
  • Which action properly addresses cavitation by reducing it?
  • Explain the energy equation for compressible flow and how stagnation temperature is defined.
  • Which statement about rotary saws is true?
  • Which parameter most directly governs flow resistance in a porous medium?
  • Which apparatuses have an intake relief valve?
  • Which Engines have chain saws?
  • What is the Nozzle Tip Pressure (NTP) for a 1 1/4 inch smooth bore nozzle handline supplied by 200 feet of 2 1/2 inch hose?
  • What is numerical diffusion, and how can it be mitigated?
  • In the drag coefficient formula Cd = Fd / (0.5 ρ U^2 A), what does A denote?
  • What is the function of the glad-hand on the USAR?
  • Which option lists the COLA components in the exact order defined for the DMV Air Brake check?
  • Which option is a valid method to power the USAR compressor?
  • Which of the following lists the COLA elements?
  • What is the NPDP hydrant formula?
  • In Cd = Fd / (0.5 ρ U^2 A), the term 0.5 ρ U^2 is known as?
  • What is the continuity equation for incompressible flow and what physical condition does it enforce?
  • When should you perform a bump test and calibrate the gas monitor?
  • Which action helps cool an overheating pump while continuing pumping?
  • Which action is NOT part of the sign-on process?
  • Under which conditions does Bernoulli's principle apply along a streamline?
  • How do you know what discharges flow foam?
  • What is the friction loss coefficient for 1 3/4 inch hose?
  • Why is the heat transfer coefficient h defined as q''/(T∞ – Ts)?
  • Where is the rear directional controller located on the USAR?
  • What is the length, from ground to tip, of the Aerial Ladder on the ALF Quint?
  • Why is continuity of heat flux at the solid–fluid interface important?
  • If the static pressure drop is 12%, how many additional lines can be added?
  • Where is the aerial ladder load chart located on the ALF Quint?
  • How do you interpret the velocity field to assess flow separation?
  • How is the front suction valve powered on the ALF Engines?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy